EasyManua.ls Logo

Siemens SINAMICS S200 - Page 694

Siemens SINAMICS S200
764 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Min:
-
Max:
-
Factory setting:
0001 bin
Description: Sets the type of control for the safety functions integrated in the drive.
Bit array: Bit Signal name 1 signal 0 signal
00 Control via F-DI Enable Inhibit
Note
When online saf
ety commissioning has been comple
ted, a change results in an automatic restart.
p9604.0 SI enable
S200 PTI Data type: Unsigned32 Visible in: Standar
d display
Read permission: Read drive data or acknowledge messages
Write permission: Edit Safety Integrated application
Can be changed in the operating
s
tate:
Commissioning (Safety Integrated)
Parameter group: Safety Integrated
Unit: -
Min:
-
Max:
-
Factory setting:
0001 bin
Description: Sets the enable signal for the safety functions integrated in the drive.
Bit array: Bit Signal name 1 signal 0 signal
00 Enable STO Enable Inhibit
p9670 SI module identi󹪝cation drive
S200 PTI Data type: U
nsigned32 Visible in: Extended display
R
ead permission: Read drive data or acknowledge messages
Write permission: Edit Safety Integrated application
Can be changed in the operating
s
tate:
Ready for operation
Parameter group: Safety Integrated
Unit: -
Min:
0
Max:
4294967295
Factory setting:
0
Description: Safety Integrated module identi󹪝er for the drive.
Replacement of t
he drive is identi󹪝ed when the safety functions are activated.
Note
After replacement, when the dr
ive runs up, an alarm is output
p9699 SI con󹪝guration alarm 󹪝ltering
S200 PTI Dat
a type: Integer16 Visible in: Extended display
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Can be
changed in the operating
state:
Ready for oper
ation
Parameter group: Basic functions
Unit: -
Min:
0
Max:
1
Factory setting:
1
Description: Sets the enable for the "Alarm 󹪝ltering" function.
Value: 0: Deactiv
ate alarm 󹪝ltering
Appendix
A.3Parameters
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
692 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA

Table of Contents

Other manuals for Siemens SINAMICS S200

Related product manuals