Siemens SINAMICS S200 - Page 700

p9795 SI reference checksum safety enable
S200 PTI Data type: Unsigned32 Visible in: Extended display 
R
ead permission: Read drive data or acknowledge messages
Write permission: Edit Safety Integrated application
Can be changed in the operating
s
tate:
Commissioning (Saf
ety Integrated)
Parameter group: Basic functions
 Unit: -
 Min:
0000 he
x
Max:
FFFF FFFF hex
Factory se
tting:
A1A1 A1A1 hex
Description: Sets the checksum over the parameters for enabling the safety functions (reference checksum).
Dependency: See also: r9794
r9798 SI actual checksum over the drive con󹪝guration
S200 PTI Data type: Unsigned32 Visible in: Extended display 
R
ead permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Basic functions
Unit: -
Description: Displays the checksum over the checksum-checked parameters to con󹪝gure the drive (actual c
hecksum).
Dependency: See also: p9799
p9799 SI reference checksum over the con󹪝guration of the drive
S200 PTI Data type: Unsigned32 Visible in: Extended display 
R
ead permission: Read drive data or acknowledge messages
Write permission: Edit Safety Integrated application
Can be changed in the operating
s
tate:
Commissioning (Saf
ety Integrated)
Parameter group: Basic functions
 Unit: -
 Min:
0000 he
x
Max:
FFFF FFFF hex
Factory setting:
A1A1 A1A1 hex
Description: Sets the checksum over the checksum-checked parameters to con󹪝gure the drive (r
eference checksum).
Dependency: See also: r9798
r9828 SI actual checksum con󹪝guration of safety functions channel B
S200 PTI Data type: Unsigned32 Visible in: Extended display 
R
ead permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Extended functions
Unit: -
Description: Displays the checksum over the checksum-checked parameters to con󹪝gure safety functions (actual chec
ksum)
channel B.
Dependency: See also: p9829
Appendix
A.3Parameters
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
698 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA