Siemens SINAMICS S200 - Page 699

Index: [0] = SI checksum to track functional changes
[1] = SI checksum to tr
ack hardware-speci󹪝c changes
Dependency: See also: p9729
r9781[0...1] SI change control time stamp days
S200 PTI Data type: Unsigned16 Visible in: Standard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Safety Integrated
Unit: -
Description: Displays the day component of the time stamp for the checksums for tracking changes for Safety Integrated.
The time stamps are g
enerated for the checksums (r9780[0...1]) (󹪝ngerprint for the "safety logbook" functionality)
Index: [0] = SI time stamp for checksum to track functional changes
[1] = SI time stamp for c
hecksum to track hardware-speci󹪝c changes
Dependency: See also: p9729, p9799
Note
The time comprises r9781 (days) and r9782 (milliseconds).
r9782[0...1] SI change control time stamp milliseconds
S200 PTI Data type: Unsigned32 Visible in: Standar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Safety Integrated
Unit: ms
Description: Displays the millisecond component of the time stamp for the checksums for tracking changes for Safety Integrated.
The time stamps are g
enerated for the checksums (r9780[0...1]) (󹪝ngerprint for the "safety logbook" functionality)
Index: [0] = SI time stamp for checksum to track functional changes
[1] = SI time stamp for c
hecksum to track hardware-speci󹪝c changes
Dependency: See also: p9729, p9799
Note
The time comprises r9781 (days) and r9782 (milliseconds).
r9794 SI actual checksum safety enable
S200 PTI Data type: Unsigned32 Visible in: Extended display 
R
ead permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Basic functions
Unit: -
Description: Displays the checksum over the parameters to enable the safety functions (actual checksum).
Dependency: See also: p9795
Appendix
A.3Parameters
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA 697