Siemens SINAMICS S200 - Page 708

p10199 SI reference checksum across device-speci󹪝c parameter
s chan B
S200 PTI Data type: Unsigned32 Visible in: Extended display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit Safety Integrated application
Can be changed in the operating
s
tate:
Commissioning (Saf
ety Integrated)
Parameter group: Basic functions
 Unit: -
 Min:
0000 he
x
Max:
FFFF FFFF hex
Factory se
tting:
B2B2 B2B2 hex
Description: Displays the checksum over the checksum-checked parameters for the device-speci󹪝c paramet
ers of the drive system
(reference checksum) channel B.
Dependency: See also: r10198
r10352.0...15 SI STO select cause
S200 PTI Data type: Unsigned32 Visible in: Standar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Safety Integrated
Unit: -
Description: Reason that STO (Safe Torque O󹪜) function was selected.
Bit array
: Bit Signal name 1 signal 0 signal 
 00 Selection via F-DI High Low 
 04 Safety commissioning mode active High Low 
 12 Stop response High Low 
 14 Response to parameterizing error High Low 
 15 Response to internal software error High Low 
r10452.0...15 SI STO select cause channel B
S200 PTI Data type: U
nsigned32 Visible in: Extended display 
R
ead permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Safety Integrated
Unit: -
Description: Reason for the selection of function STO (Safe Torque O󹪜) on c
hannel B.
Bit arr
a
y
: Bit
Signal name 1 signal 0 signal 
 00 Selection via F-DI High Low 
 04 Safety commissioning mode active High Low 
 12 Stop response High Low 
 14 Response to parameterizing error High Low 
 15 Response to internal software error High Low 
Appendix
A.3Parameters
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
706 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA