Figure 7-21 Flat display style
Figure 7-22 3D display style
Enabled – operability of the TouchButton
Syntax: ReturnValue = ReadCWProperty(
TouchButtonVarName
, "Enabled")
WriteCWProperty(
TouchButtonVarName
, "Enabled",
Value
)
Description: Read/sets as to whether the TouchButton can be operated (= TRUE) - or cannot
be operated (FALSE).
Parameter: TouchButtonVar‐
Name
Name of the display variable that contains a SlEsTouch‐
Button
Return Value Read value of the property (bool)
Value Value to be set (bool): TRUE (default) or FALSE
Figure 7-23 TouchButton can be operated
Figure 7-24 TouchButton cannot be operated
Note
If a TouchButton that cannot be operated is clicked, then signal "clickedDisabled" is sent. The
signal can be evaluated, for example an appropriate message issued as to why the
TouchButton and the associated function presently cannot be operated. In the deactivated
state, the picture or background picture is automatically displayed in shades of gray.
Graphic and logic elements
7.6 SlEsTouchButton
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1 251
To Next Page
Loading...
Need help?
General
