Siemens SINUMERIK ONE MCP 2400.4c Commissioning Manual

Updating the software
Procedure:
1. In the main menu, select the menu item "Update NCU Software and Data".
The following menu is displayed:
Figure 3-13 Software update
2. Select the menu item "Update system software from USB memory stick".
The list of the tgz files available on the USB storage medium are displayed.
Service and diagnostics
3.5 Updating the software
NCU operating system
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 87

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English