Precondition
● The PG/PC is linked with the Siemens PC system in one of the following ways:
– The PG/PC is connected to the PC system with an Ethernet cable (either directly or via
a switch)
See: Connection options in the system network (Page 141)
– The PG/PC is networked with the PC system via an interface on the NCU and the routing
is configured.
See: Configuring routing in the network (Page 144)
● A current Microsoft Windows operating system is installed on the PG/PC
● The PG/PC is switched on
Backing up and restoring data
6.12 Operating a service PC/PC in the network
PCU Base Software (IM10)
146 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
