The application name to be used for configuration within a display configuration:
SlMcpApp
The application may only be used in one instance within a display configuration.
Application for displaying widgets
Configuration in the standard version:
[dialogs]
DLG110= name:=SlWidgetsApp,
implementation:=sldmsidescreenapp.SlSideScreenDialog,
process:=SlHmiHost1, preload:=false, cmdline:="-sidescreen1
sldmwidgets1.ini -sidescreen2 sldmwidgets2.ini -spacing 3"
The application name to be used for configuration within a display configuration:
SlWidgetsApp
The application may only be used in one instance within a display configuration.
SINUEMRIK Operate
The application name to be used for configuration within a display configuration:
OPERATE
SINUMERIK Operate may only be used in one instance within a display configuration.
It should also be noted that SINUMERIK Operate can only be displayed/executed in certain
sizes. The currently supported sizes (in pixels) are:
● 640x480
● 760x505
● 800x480
● 800x600
● 1024x768
● 1024x1014
● 1080x810
● 1280x768
● 1280x800
● 1280x1024
● 1300x768
● 1366x768
General settings
3.14 Display Manager
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 69
To Next Page
Loading...
Need help?
General
