Siemens SIPROTEC 5 - 4.1 Overview

Overview
The function library in DIGSI 5 provides application templates for the applications of the fault recorders. The
application template
•
Contains the basic configuration for a specific use case
•
Contains functions and default settings for a specific use case
Chapter 2.2 Adjustment of Application Templates/Functional Scope describes am example for the structure of
an application template.
When using an application template, please note the following:
•
Adapt the signal routings by adding and removing routings to specific recorders.
•
Adapt the application template to your specific use (check/adapt default settings, delete/add functions).
You can find more detailed information in the 2.2 Adjustment of Application Templates/Functional
Scope.
•
Check the routing of binary outputs with respect to fast and normal relays.
•
Check the CFC charts for the group-warning indications and group-fault indications.
4.1
Applications
4.1 Overview
104 SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017