Siemens SIPROTEC 5 User Manual

Overview
SIPROTEC 5 devices are equipped with an extensive and integrated supervision concept. Continuous supervi-
sion:
•
Ensures the availability of the technology used
•
Avoids subfunction and overfunction of the device
•
Protects persons and primary technical devices
•
Offers effective assistance during commissioning and testing
The following areas are monitored:
•
Supervision the resource consumption of the application
•
Supervision of the secondary system
•
Supervision of device hardware
•
Supervision of device firmware
•
Supervision of hardware configuration
•
Supervision of communication connections
When the supervision functions pick up, that will be displayed and also indicated. Error responses are defined
for the device. The error responses are grouped in defect severities.
The supervision functions work selectively. When the supervision functions pick up - as far as possible - only
the affected parts of the hardware and firmware are blocked. If this is not possible, the device goes out of
operation into a secure state (fallback mode). In addition to safety, this warrants a high degree of availability.
8.1
Supervision Functions
8.1 Overview
362 SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017

Siemens SIPROTEC 5 Specifications

General

Series	SIPROTEC 5
Communication Protocols	IEC 61850, DNP3, Modbus
Cybersecurity	Role-based access control, secure communication
Modular Design	Yes
Hardware Redundancy	Optional
Operating Temperature	-25°C to +70°C
Digital Inputs	Configurable, number depends on I/O modules
Digital Outputs	Configurable, number depends on I/O modules
Analog Inputs	Configurable, number depends on I/O modules
Current Transformer Inputs	Configurable, number depends on I/O modules
Voltage Transformer Inputs	Configurable, number depends on I/O modules
Time Synchronization	IRIG-B, SNTP, PTP
Protection Functions	Overcurrent, Differential, Distance, Over/Under Voltage, Frequency
Housing	19-inch Rack Mount
Dimensions	Depends on module configuration
Weight	Depends on module configuration
Voltage Input	24V DC, 48V DC, 110V DC, 125V DC, 220V DC, 250V DC