Siemens SIPROTEC 5 User Manual

Supervision Functions
Voltage-Balance Supervision
Setting Values
Release threshold 0.300 V to 170.000 V Increments of 0.001 V
Threshold min/max 0.58 to 0.95 Increments of 0.01
Delay failure indication 0.00 s to 100.00 s Increments of 0.01 s
Dropout Ratio
Overvoltage dropout ratio Approx. 0.97
Undervoltage dropout ratio Approx. 1.05
Times
Tripping time Approx. 500 ms
Dropout time Approx. 500 ms
Voltage-Sum Supervision
Setting Values
Threshold
0.300 V to 170.000 V Increments of 0.001 V
Delay failure indication 0.00 s to 100.00 s Increments of 0.01 s
Dropout Ratio
Dropout ratio
Approx. 0.97
Times
Tripping time
Approx. 500 ms
Dropout time Approx. 500 ms
Voltage Phase-Rotation Supervision
Setting Values
Tripping delay
0.00 s to 100.00 s Increments of 0.01 s
Phase-rotation direction A B C
A C B
Times
Tripping time
Approx. 500 ms
Dropout time Approx. 500 ms
11.5
11.5.1
11.5.2
11.5.3
Technical Data
11.5 Supervision Functions
SIPROTEC 5, Fault Recorder, Manual 441
C53000-G5040-C018-5, Edition 11.2017

Siemens SIPROTEC 5 Specifications

General

Series	SIPROTEC 5
Communication Protocols	IEC 61850, DNP3, Modbus
Cybersecurity	Role-based access control, secure communication
Modular Design	Yes
Hardware Redundancy	Optional
Operating Temperature	-25°C to +70°C
Digital Inputs	Configurable, number depends on I/O modules
Digital Outputs	Configurable, number depends on I/O modules
Analog Inputs	Configurable, number depends on I/O modules
Current Transformer Inputs	Configurable, number depends on I/O modules
Voltage Transformer Inputs	Configurable, number depends on I/O modules
Time Synchronization	IRIG-B, SNTP, PTP
Protection Functions	Overcurrent, Differential, Distance, Over/Under Voltage, Frequency
Housing	19-inch Rack Mount
Dimensions	Depends on module configuration
Weight	Depends on module configuration
Voltage Input	24V DC, 48V DC, 110V DC, 125V DC, 220V DC, 250V DC