Siemens SIPROTEC 5 - Application and Setting Notes - General Settings

Application and Setting Notes – General Settings
Parameter: Phase sequence
•
Recommended setting value (_:2311:101) Phase sequence= ABC
The parameter Phase sequence is used to set the phase sequence (ABC) or (ACB). The setting value applies
to the entire SIPROTEC 5 device.
Use the General function to set the settings in the power-system data.
5.3
Power-System Data
5.3 Application and Setting Notes – General Settings
112 SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017