Siemens SIPROTEC 5 User Manual

The current function point consumption can be queried in DIGSI 5 using the menu item Device information
diagram in the tab Resource consumption. The number of function points which functions or function blocks
require is found in Table 4-1.
Extending the Function-Point Credit
You can reorder function points if the function-point credit for the device is not enough.
Proceed as follows:
•
Determine the function point requirement of certain functions, for example, with DIGSI 5 or the
SIPROTEC 5 Configurator (http://www.energy.siemens.com/hq/de/automatisierung/stromuebertragung-
verteilung/schutz/siprotec5/bestellkonfigurator.htm).
•
Order the additional function points from your local distributor or at http://www.energy.siemens.com.
•
Siemens will provide you with a signed license file for your device, either via e-mail or for downloading.
•
Use DIGSI 5 to load the signed license file into your device. The procedure is described in the Online Help
of DIGSI 5.
Basic Structure of the Function
2.2 Adjustment of Application Templates/Functional Scope
36 SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017

Siemens SIPROTEC 5 Specifications

General

Series	SIPROTEC 5
Communication Protocols	IEC 61850, DNP3, Modbus
Cybersecurity	Role-based access control, secure communication
Modular Design	Yes
Hardware Redundancy	Optional
Operating Temperature	-25°C to +70°C
Digital Inputs	Configurable, number depends on I/O modules
Digital Outputs	Configurable, number depends on I/O modules
Analog Inputs	Configurable, number depends on I/O modules
Current Transformer Inputs	Configurable, number depends on I/O modules
Voltage Transformer Inputs	Configurable, number depends on I/O modules
Time Synchronization	IRIG-B, SNTP, PTP
Protection Functions	Overcurrent, Differential, Distance, Over/Under Voltage, Frequency
Housing	19-inch Rack Mount
Dimensions	Depends on module configuration
Weight	Depends on module configuration
Voltage Input	24V DC, 48V DC, 110V DC, 125V DC, 220V DC, 250V DC