Siemens SIPROTEC 5 User Manual

[lo_warning_indication, 1, en_US]
Figure 8-27 Forming of a Warning Group Indication Group Warning
Overview of Errors
Indication Type Group
Warning
Explanation
General:
(_:53) Health ENS CFC If the Health of an individual function
block, for example a protection stage or
an individual function, goes to the
Warning or Alarm state, this state is
processed via the associated function
group up to the general group indication
Health (_:53).
Check from the operational log from
which function or function block the
error originates. In the associated func-
tion description, there is additional
information as to why the Health of the
function or a function block can change.
(_:53) Health = Warning SPS
(_:53) Health = Alarm SPS
Device:
Supervision Functions
8.8 Error Responses and Corrective Measures
SIPROTEC 5, Fault Recorder, Manual 403
C53000-G5040-C018-5, Edition 11.2017

Siemens SIPROTEC 5 Specifications

General

Series	SIPROTEC 5
Communication Protocols	IEC 61850, DNP3, Modbus
Cybersecurity	Role-based access control, secure communication
Modular Design	Yes
Hardware Redundancy	Optional
Operating Temperature	-25°C to +70°C
Digital Inputs	Configurable, number depends on I/O modules
Digital Outputs	Configurable, number depends on I/O modules
Analog Inputs	Configurable, number depends on I/O modules
Current Transformer Inputs	Configurable, number depends on I/O modules
Voltage Transformer Inputs	Configurable, number depends on I/O modules
Time Synchronization	IRIG-B, SNTP, PTP
Protection Functions	Overcurrent, Differential, Distance, Over/Under Voltage, Frequency
Housing	19-inch Rack Mount
Dimensions	Depends on module configuration
Weight	Depends on module configuration
Voltage Input	24V DC, 48V DC, 110V DC, 125V DC, 220V DC, 250V DC