[scanwhmi-220213-01.tif, 1, en_US]
Figure 3-7 Reading the User-Specific Log on the On-Site Operation Panel of the Device
Deletability
The user-defined log of your SIPROTEC 5 device can be deleted.
Read about it in the chapter 3.1.10 Saving and Deleting the Log .
Configuration of a User-Defined Log
The indication scope of a created user-specific log can be configured freely in the associated column of the
information routing (matrix) of DIGSI 5:
Target → Log → V1 or V2
System Functions
3.1 Indications
SIPROTEC 5, Fault Recorder, Manual 51
C53000-G5040-C018-5, Edition 11.2017
To Next Page
Loading...
