Siemens SIRIUS ACT 3SU1 - Selector Switches 4 Switch Positions

3SU10 pushbuttons and indicator lights
5.2 3SU10 devices for use on 4-slot holder
SIRIUS ACT 3SU1 pushbuttons and signaling devices
108 System Manual, 08/2018, A5E03457306020A/RS-AK/010
5.2.2
Selector switches 4 switch positions
Selector switches are used to actuate contact modules. The selector switch has 4 defined
switch positions (0 position 3/6/9/12 o'clock). When these switch positions are changed, the
current operation is concluded before the new one is activated.
These devices are available in different variants according to the following features:
● Collar and front ring material
A holder for 4 modules (3SU15.0-0BA10-0AA0) is required for all of the devices listed below.
You will find additional information on this in Chapters "Holders (Page 213)", "Mounting
(Page 109)" and "Equipping with contact modules without EMERGENCY STOP (Page 177)".
Selector switches 4 switch positions (rotary knob)
4 switch positions
Collar / Front ring material
Plastic / Plastic
• Black / White
3SU1000-2AS60-0AA0
Plastic / Metal, matte
• Black / White
3SU1030-2AS60-0AA0
Metal / Metal
• Black / White
3SU1050-2AS60-0AA0
Control of the modules using the selector switch
In the selector switch's intermediate positions (10:30 or 1:30 o'clock), no module is
controlled.
Switch position
Module at
holder position 1
Module at
holder position 2
Module at
holder position 3
Module at
holder position 4
3 h
X
—
—
—
6 h
—
X
—
—
9 h
—
—
X
—
12 h
—
—
—
X