Siemens SIRIUS ACT 3SU1 - Acyclic Data Exchange with the IO_LINK_DEVICE Function Block

IO-Link 3SU14
12.1 Configuring the IO-Link
SIRIUS ACT 3SU1 pushbuttons and signaling devices
308 System Manual, 08/2018, A5E03457306020A/RS-AK/010
12.1.5
Acyclic data exchange with the IO_LINK_DEVICE function block
For acyclic data exchange, the IO_LINK_DEVICE function block is available as a download
for controllers of the S7 families.
The block supports you in the following tasks:
● Parameterization of an IO-Link device during operation
● Executing IO-Link port functions
● Backing up/restoring IO-Link device parameters
Requirements
● Install the IO_LINK_DEVICEfunction block.
You can download the IO_LINK_DEVICE function block and the description from the
Internet (https://support.industry.siemens.com/cs/ww/en/view/82981502
).
Procedure when using the IO_LINK_DEVICE function block
1. Copy the IO_LINK_DEVICE function block (including data block DB10) to a STEP 7
project.
2. Use the IO_LINK_DEVICE function block as described in the documentation.
3. You can find an application example of how to use the IO-Link devices with the
IO_LINK_DEVICE function block on the Internet
(http://support.automation.siemens.com/WW/view/en/90529409
).