Siemens SIRIUS ACT 3SU1 - Switching Output Parameter; Active Edge Parameter Output

IO-Link 3SU14
12.3 Electronic modules for IO-Link
SIRIUS ACT 3SU1 pushbuttons and signaling devices
354 System Manual, 08/2018, A5E03457306020A/RS-AK/010
12.3.3.10
"Switching output” parameter
"Switching output” parameter
Target value with which the actual switching cycle number is compared. The number of
switching cycles can be set to between 0 and 4 294 967 295.
Settings
Description
Default setting
1
Number of switching cycles: Minimum value
0
4294967295
Number of switching cycles: Maximum value
—
Increment:1
12.3.3.11
"Active edge” parameter output
"Active edge” parameter
Selection of type of edges to be counted. The following edge types are available for
selection:
● None
● Rising edge
● Falling edge
● All edges
Settings
Description
Default setting
0
None
Rising edge
1
Rising edge
—
2
Falling edge
—
3
All edges
—