3SU19 accessories
13.2 Identification of command points
SIRIUS ACT 3SU1 pushbuttons and signaling devices
388 System Manual, 08/2018, A5E03457306020A/RS-AK/010
Label holders are used for simple labeling of command points in conjunction with labeling
plates.
Label holders are available in different variants (for sticking or for snap-on mounting).
The label holders are suitable for:
● Mounting with enclosures without a recess for a labeling plate
Note that only front plate mounting is possible.
● Front plate mounting
Also note the information in Chapters "Combination options of the accessories (Page 435)"
and "Use of accessories for the enclosure (Page 437)".
Siemens Industry Mall
(https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10231447
)
Note
The use of label holders reduces the front plate thickness that can be clamped to < 4
mm.
inations of label holders and protective caps are permitted.
To Next Page
Loading...
