Siemens SIRIUS ACT 3SU1 - Dust Cap

3SU19 accessories
13.3 Protection
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
401
Description
Article number
Protective cap for EMERGENCY STOP pushbuttons
Suitable for:
• EMERGENCY STOP buttons, 30 mm and 40 mm
diameter, without key-operated release
• Installation in enclosures only in combination with
single-pole contact modules for front plate mounting
3SU1900-0EH70-0AA0
Protective cap for twin pushbuttons, raised
Suitable for:
• Installation in enclosures (without recess for labeling
plates) only in combination with single-pole contact
modules for front plate mounting
3SU1900-0EK70-0AA0
13.3.5
Dust cap
You can find information on mounting dust caps in Chapter "Installation steps for dust cap
(Page 410)".
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10221534
)
Description
Article number
Dust cap for key-operated switches
Suitable for:
• All key-operated switches with 22.5 mm or 30.5 mm
mounting diameter
3SU1900-0EB10-0AA0
Dust cap for ID key-operated switches
Suitable for:
• All ID key-operated switches with 22.5 mm mounting
diameter
3SU1900-0EM70-0AA0