Siemens SIRIUS ACT 3SU1 - Labeling Plate for Potentiometer

3SU19 accessories
13.2 Identification of command points
SIRIUS ACT 3SU1 pushbuttons and signaling devices
380 System Manual, 08/2018, A5E03457306020A/RS-AK/010
13.2.2.6
Labeling plate for potentiometer
The labeling plates for potentiometers are used to improve the readability of the
potentiometer setting. They are clipped immediately under the actuator. A label holder is not
required for this.
The labeling plates for potentiometers are suitable for:
● Mounting with enclosures without a recess for a labeling plate
Note that only mounting with front mounting modules is possible.
● Front plate mounting
Note
When mounting the labeling plates, please note the maximum front plate thickness <
4 mm.
Siemens Industry Mall
(https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10228442
)
Description
Article number
Typical diagram
Labeling plates for self-inscription
3SU1900-0BG16-0AA0
Labeling plate with inscription: 0 ... 9
3SU1900-0BG16-0RT0
Labeling plate with inscription: 0 ... 10
3SU1900-0BG16-0SA0
Labeling plate with graphical symbol: Startup 3SU1900-0BG16-0RU0