Siemens SIRIUS ACT 3SU1 - Base Mounting for the Enclosure; Equipping with Contact and LED Modules

3SU14 modules
8.2 Mounting
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
207
8.2.4
Base mounting for the enclosure
8.2.4.1
Equipping with contact and LED modules
The contact modules and LED modules are mounted in the enclosure base.
To equip an enclosure, follow these steps:
1. Snap the module
① onto a slot in the enclosure. The narrow snap hook must point in
direction "A" here.
Refer also to the information on fitting in Chapter "Mounting positions (Page 224)".