Siemens SIRIUS ACT 3SU1 - Miscellaneous Accessories; Square Single Frame; Unit Labeling Plate

3SU19 accessories
13.11 Miscellaneous accessories
SIRIUS ACT 3SU1 pushbuttons and signaling devices
432 System Manual, 08/2018, A5E03457306020A/RS-AK/010
13.11
Miscellaneous accessories
13.11.1
Square single frame
You can mount the square single frame over a round signal panel cutout to change its
appearance to "square".
The square single frame is suitable for:
● Actuators with round front ring and a mounting diameter of 22.5 mm
● Installation in enclosures (without recess for labeling plates) only in combination with
single-pole contact modules for front plate mounting
● Front plate mounting
Front plate thickness < 4 mm
Also note the information in Chapters "Combination options of the accessories (Page 435)"
and "Use of accessories for the enclosure (Page 437)".
Siemens Industry Mall
(
http://mall.industry.siemens.com/mall/en/WW/Catalog/Product/?mlfb=3SU1900-0AX10-
0AA0)
Description
Article number
Square single frame 3SU1900-0AX10-0AA0
13.11.2
Unit labeling plate
The unit labeling plate is snapped onto the back of the contact modules or LED modules
(front mounting) and is used for labeling the modules.
Siemens Industry Mall
(https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10228442
)
Description
Article number
Unit labeling plate 3SU1900-0AY61-0AA0