Overview
4.5 Types of 3SU1 actuating elements and signaling elements
SIRIUS ACT 3SU1 pushbuttons and signaling devices
36 System Manual, 08/2018, A5E03457306020A/RS-AK/010
The 3SU15 holders are used to secure the actuating or signaling elements and the contact
module or LED module. The holders are designed for mounting in front plates with a plate
thickness of 1 to 6 mm.
3SU15 holders made of metal or plastic and with 3 or 4 slots for contact or LED modules are
available. A holder has three slots as standard. Holders with four slots are available for the
actuating elements, coordinate switches and selector switches with four switch positions.
For further information, refer to Chapter "3SU15 holders (Page 213)".
Plastic
Metal
To Next Page
Loading...
