Siemens SIRIUS ACT 3SU1 - Additional Accessories

3SU19 accessories
13.11 Miscellaneous accessories
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
433
13.11.3
Additional Accessories
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10221537
)
Description
Material
Article number
PCB carrier
The drill-hole spacing of the PCB
carrier is: 20.5 mm
Plastic 3SU1900-0KA10-0AA0
Standard mounting rail adapter
The standard mounting rail adapter
can be used in conjunction with the
3-slot holder (3SU15.0-0AA00-
0AA0), 1-pole contact modules and
LED modules.
The contact modules must not be
stacked in this case.
You will find more information in
Chapters "3SU15 holders
(Page 213)" and "3SU14 modules
(Page 169)".
Plastic 3SU1900-0KH80-0AA0
Pressure plate
Pressure plate for selector switches,
twin pushbuttons and key-operated
switches
Lock for controlling which contact
modules are to be operated.
You will also find information in
Chapter "Selector switches
(Page 69)".
Plastic 3SU1900-0KC10-0AA0
Adapter
Adapter for actuators and indicators
with front ring for flat mounting
The adapter is needed for all
30.5 mm actuators and accessories.
The adapter is included in the scope
of supply of the actuator and
accessories.
Metal 3SU1950-0KJ80-0AA0
Adapter
Adapter for installing 22.5 mm
actuators in a 30.5 mm mounting
hole. The adapter corresponds to
the contour of the actuators with a
30.5 mm mounting diameter.
With the adapter, all 22.5 mm
pushbuttons can also be used in a
30.5 mm mounting hole.
Metal
shiny
Metal
matte
3SU1950-0KB10-0AA0
3SU1960-0KB10-0AA0