3SU19 accessories
13.2 Identification of command points
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
369
Labeling plates are used for more detailed labeling of a command point. They are used
typically in conjunction with a label holder or an enclosure. The labeling plate for the
potentiometer and the labeling plate for the enclosure with emergency stop devices are
exceptions here
The labeling plates are available in different colors and variants (black with white print or
silver-colored with black print) for sticking or snapping in place.
Labeling plate 12.5 x 27 mm
Labeling plates can be snapped on or attached by sticking to the holder. Labeling plates are
used in combination with label holders.
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10226804
)
Labeling plate 3SU1900-0AC16-0AA0
Labeling plate with inscription in German
Links 3SU1900-0AC16-0AJ0
To Next Page
Loading...
