Siemens SIRIUS ACT 3SU1 - LED Test Module

3SU14 modules
8.1 Overview
SIRIUS ACT 3SU1 pushbuttons and signaling devices
190 System Manual, 08/2018, A5E03457306020A/RS-AK/010
8.1.13
LED test module
The LED test modules are used to test the LED modules (AC/DC variants). One LED module
is connected to each test module for testing. The LED test module is activated via a contact
module. This supplies the connected LED modules (to be tested) with a test voltage. The
test module can be used to test LED modules (6 ... 24 V AC/DC, 24 V AC/DC,
24 ... 240 V AC/DC).
①
Lamp test
You will find more information in Chapters "Holders (Page 213)" and "Mounting". (Page 199)
Typical diagram
Operating voltage
Article number
LED test module for
base mounting
(enclosure mounting)
6 ... 240 V AC/DC 3SU1400-2CK10-1AA0
Siemens Industry Mall
(https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10298046)
LED test module for
front plate mounting
3SU1400-1CK10-1AA0
Siemens Industry Mall
(https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10298046)