Siemens SIRIUS ACT 3SU1 - 22.5 MM Key-Operated Switches

3SU10 pushbuttons and indicator lights
5.1 3SU10 devices for use on 3-slot holder
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
81
5.1.16
22.5 mm key-operated switches
Key-operated switches are equipped with a lock for safety reasons. Only an authorized
group of persons who have access to the relevant key can perform a switching operation (in
this case, actuation of contact modules). Up to 3 switch positions can be temporarily or
permanently selected using a key-operated switch.
Key-operated switches are available in different variants according to the following features:
● Key-operated switch manufacturer
● Key removal positions
● Switch positions
● Collar and front ring material
● Switching functions: latching / momentary contact
For further information, refer to Chapter "Mounting (Page 109)".
Key-operated switches 2 switch positions (0 - I)
Typical diagram
Version
Article number
Momentary contact
Siemens Industry Mall (http://mall.industry.siemens.com/mall/en/ww/Catalog/Products/10221489)
Momentary contact
45° (10:30/12
o'clock),
reset from center to
left
Ronis, SB30
3SU10x0-4BCy1-0AA0
Ronis, 455
3SU10x0-4CCy1-0AA0
O.M.R. 73037, red
3SU10x0-4FCy1-0AA0
O.M.R. 73038, light blue
3SU10x0-4GCy1-0AA0
O.M.R. 73034, black
3SU10x0-4HCy1-0AA0
O.M.R. 73033, yellow
3SU10x0-4JCy1-0AA0
CES, SSG10
3SU10x0-5BCy1-0AA0
CES, LSG1 3SU10x0-5HCy1-0AA0
BKS, S1
3SU10x0-5PCy1-0AA0
IKON, 360012K1
3SU10x0-5XCy1-0AA0
x: 0 = Material plastic
x: 3 = Material metal matte
x: 5 = Material metal
y: 0
= Key can be removed in position O
y: 1 = Key can be removed in any position
y: 2 = Key can be removed in position I
1)
Key not included in the scope of supply