Siemens SIRIUS ACT 3SU1 - Removal of the Modules

AS-Interface 3SU14
11.8 Installing and dismantling AS-Interface modules for base mounting
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
273
11.8.6
Removal of the modules
Requirement
Enclosure cover is disassembled.
1.
insert a screwdriver into the opening of the latches of the AS
-Interface modules for
base mounting.
2.
Press the screwdriver in the direction of the mod
ule you want to remove to open the
latches of the modules.
Remove the modules.
3.
Insert a screwdriver into the opening of the latches (broad snap hook) of th
e contact
modules or LED modules.
4.
Press the screwdriver in the direction of the module you want to remove to open the
latches of the modules.
Remove the modules.