Siemens SIRIUS ACT 3SU1 - Removal of the Modules

IO-Link 3SU14
12.3 Electronic modules for IO-Link
SIRIUS ACT 3SU1 pushbuttons and signaling devices
360 System Manual, 08/2018, A5E03457306020A/RS-AK/010
12.3.5.5
Removal of the modules
Requirement
Enclosure cover is disassembled.
Procedure
1. Insert a screwdriver into the opening of the latches (broad snap hook) of the contact
modules or LED modules.
Or insert a screwdriver into the opening of the latches of the electronic modules for
IO-Link.
2. Press the screwdriver in the direction of the module you want to remove to open the
latches of the modules.
Remove the modules.