AS-Interface 3SU14
11.8 Installing and dismantling AS-Interface modules for base mounting
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
271
Mounting of the contact modules and AS-Interface F-Safe slaves
The AS-Interface slaves are mounted in the enclosure base like contact modules or LED
modules. To equip an enclosure with contact modules and an AS-Interface F slave, follow
these steps:
1. Snap the contact module onto the slot in the enclosure marked "1", "2" or "3".
2. Insert the AS-Interface F slave (3SU1400-2EA10-6AA0) into the slot marked with "3".
Note
Mounting position of the AS-Interface F slave
The AS
-Interface F slave may only be mounted in the enclosure at the slots marked with "3".
You can find information on the accessories in Chapter "Accessories (Page 365)".
To Next Page
Loading...
