Siemens SIRIUS ACT 3SU1 - System Commands - Data Set (Index) 2

Appendix
A.1 Process data and data sets
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
591
A.1.2.4
System commands - data set (index) 2
Data set (index) 2 - system commands
Table A- 17 Data set (index) 2 - system commands
Data set
Access
Parameter
Length
(bytes)
Default setting
Index (dec)
2 w System Command
1)
1 —
1)
Permissible vendor-specific system commands:
0x81 for Application Reset
0x82 for Restore Factory Setting
0xA0 for Reset On-Duration Counter Input/Output 0
0xA1 for Reset On-Duration Counter Input/Output 1
0xA2 for Reset On-Duration Counter Input/Output 2
0xA3 for Reset On-Duration Counter Input/Output 3
0xA4 for Reset On-Duration Counter Input/Output 4
0xA5 for Reset On-Duration Counter Input/Output 5
0xA6 for Reset On-Duration Counter Input/Output 6
0xA7 for Reset On-Duration Counter Input/Output 7
0xA8 for Reset Switching Counter Input/Output 0
0xA9 for Reset Switching Counter Input/Output 1
0xAA for Reset Switching Counter Input/Output 2
0xAB for Reset Switching Counter Input/Output 3
0xAC for Reset Switching Counter Input/Output 4
0xAD for Reset Switching Counter Input/Output 5
0xAE for Reset Switching Counter Input/Output 6
0xAF for Reset Switching Counter Input/Output 7
0xB0 for Reset On-Duration Counter Input/Output 0 - 7
0xB1 for Reset Switching Counter Input/Output 0 - 7