Siemens SIRIUS ACT 3SU1 - Sun Collar; Protective Collar

3SU19 accessories
13.3 Protection
SIRIUS ACT 3SU1 pushbuttons and signaling devices
402 System Manual, 08/2018, A5E03457306020A/RS-AK/010
13.3.6
Sun collar
The sun collar is fitted after the illuminated pushbutton is installed and helps to improve the
visibility of the illuminated pushbutton.
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10221534
)
Description
Article number
Sun collar
Suitable for:
• All pushbuttons with 22.5 mm mounting diameter
(not suitable for twin pushbuttons)
• Installation in enclosures only in combination with
single-pole contact modules for front plate mounting
3SU1900-0DJ10-0AA0
13.3.7
Protective collar
Note
The fron
t plate thickness is restricted to < 4 mm for all accessory components that are
installed beneath an actuator.
The protective collar is fitted before the pushbutton / illuminated pushbutton is installed. It is
designed to protect the pushbutton. In addition, the visibility of the illuminated pushbutton is
improved.
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10221534
)
Description
Material
Article number
360° protective collar
Suitable for:
• Pushbuttons and short selector
switches, with 22 5 mm mounting
diameter
• Installation in enclosures (without
recess for labeling plates) only in
combination with single-pole
contact modules for front plate
mounting
• Front plate mounting
Front plate thickness < 4 mm
Plastic,
black
3SU1900-0DW10-0AA0