Siemens SIRIUS ACT 3SU1 - 12 IO-Link 3 SU14; 12.1 Configuring the IO-Link

SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
303
IO-Link 3SU14
12
12.1
Configuring the IO-Link
12.1.1
Combinations
IO-Link master and IO-Link device combinations are shown in the following table.
IO-Link master...
IO-Link device...
... according to the IO-Link communication
specification V1.0
... according to the IO-Link communication
specification V1.1
...according to IO-Link
communication specification
V1.0
Operation according to specification V1.0 Operation according to specification V1.0
...according to IO-Link
communication specification
V1.1
Operation according to specification V1.0
Operation according to specification V1.1
1)
1)
By selection of IODD V1.0.1, the device can be operated according to IO-Link communication specification V1.0.
Differences between IO-Link communication specifications V1.0 and V1.1
● Usable IO-Link message frame length (not relevant)
● Application-specific name: V1.0: 64 bytes max./V1.1: 32 bytes max.
● Parameter server functionality: V1.0: not available/V1.1: available