3SU18 enclosures
10.4 3SU18..-3 two-hand operation console
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
247
It is possible to mount the two-hand operator consoles both on the associated stands and
directly on the machine via the back panel drill holes.
The dimension drawings and drilling plans can be found under Dimension drawings in
Chapter "Two-hand operator console (Page 519)".
Installation and wiring of two-hand operation console
1. Unscrew the cover on the bottom of the two-hand operation console.
2. Wire and ground the two-hand operation console. The diagram shows a typical grounding
arrangement for a two-hand operation console mounted on a stand. You can find
information on fitting and wiring with modules in Chapter "3SU14 modules (Page 169)"
To Next Page
Loading...
