3SU19 accessories
13.3 Protection
SIRIUS ACT 3SU1 pushbuttons and signaling devices
400 System Manual, 08/2018, A5E03457306020A/RS-AK/010
Protective cap, silicone-free
The protective cap is fitted before the actuating element is installed so as to protect the
element against dust and contamination. The material of the protective caps listed below is
silicone-free.
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10221534
)
Protective cap for pushbuttons, flat
Suitable for:
• All pushbuttons with 22.5 mm mounting diameter with
flat button and front ring
(not suitable for twin pushbuttons)
• Installation in enclosures only in combination with
single-pole contact modules for front plate mounting
3SU1900-0ED70-0AA0
Protective cap for pushbuttons, raised
Suitable for:
• All pushbuttons with 22.5 mm mounting diameter
(not suitable for twin pushbuttons)
• Installation in enclosures only in combination with
single-pole contact modules for front plate mounting
3SU1900-0EE70-0AA0
Protective cap for selector switches, short selector
Suitable for:
• All selector switches (short selector)
• Installation in enclosures only in combination with
single-pole contact modules for front plate mounting
3SU1900-0EF70-0AA0
Protective cap for mushroom pushbutton, diameter
40 mm
Suitable for:
• Mushroom pushbuttons, diameter 40 mm
• Installation in enclosures only in combination with
single-pole contact modules for front plate mounting
3SU1900-0EG70-0AA0
To Next Page
Loading...
