IO-Link 3SU14
12.3 Electronic modules for IO-Link
SIRIUS ACT 3SU1 pushbuttons and signaling devices
350 System Manual, 08/2018, A5E03457306020A/RS-AK/010
The following input parameters can be set:
● Input delay
● Inverting input
● Switching input
● Active edges
● Threshold switch-on duration
The following output parameters can be set:
● Inverting output
● PWM frequency
● PWM duty cycle
● Dimming time
● Switching output
● Active edges
Notes on parameter assignment
Transfer of the parameters with the "Parameterserver" function if IO-Link masters and
IO-Link devices according to the IO-Link communication specification V1.1 are available:
1. The "Parameter server" function backs up the parameter data from the IO-Link devices.
2. Replace the IO-Link device.
3. The parameter data is automatically written back to the new IO-Link device on system
startup.
To Next Page
Loading...
