Siemens SIRIUS ACT 3SU1 - LED Modules for 24 V Intrinsic Safety (Floor Mounting); LED Modules for PCB Mounting

3SU14 modules
8.1 Overview
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
189
8.1.11
LED modules for 24 V intrinsic safety (floor mounting)
The LED modules for enclosure mounting are installed in 3SU18 enclosures. The LED
modules are approved in accordance with IEC 60079-11 and are used in hazardous zones
1, 2. They comply with the "ib" type of protection for intrinsic safety.
On enclosures with raised cover (Article No.: 3SU180(5)1-1AA00-0AA1) base mounting is
not envisaged.
You will find additional information in Chapters "ATEX for intrinsically safe circuits
(Page 25)", "3SU18 enclosures (Page 219)".
Typical diagram
Operating voltage
Color of the LED
Article number
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10251008)
24 V AC/DC Amber 3SU1401-2BB00-xAA2
Red
3SU1401-2BB20-xAA2
Yellow
3SU1401-2BB30-xAA2
Green
3SU1401-2BB40-xAA2
Blue
3SU1401-2BB50-xAA2
White
3SU1401-2BB60-xAA2
x: 1 = screw terminals
x: 3 = spring-loaded terminals
8.1.12
LED modules for PCB mounting
Operating voltage
Color of the LED
Article number
Siemens Industry Mall (http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10221527)
5 V DC
Amber
3SU1401-3BA00-5AA0
Red
3SU1401-3BA20-5AA0
Yellow
3SU1401-3BA30-5AA0
Green
3SU1401-3BA40-5AA0
Blue
3SU1401-3BA50-5AA0
White
3SU1401-3BA60-5AA0
Socket terminal (THT)