Siemens SIRIUS ACT 3SU1 - LED Modules for Front Plate Mounting

3SU14 modules
8.1 Overview
SIRIUS ACT 3SU1 pushbuttons and signaling devices
184 System Manual, 08/2018, A5E03457306020A/RS-AK/010
8.1.8
LED modules for front plate mounting
LED modules for front plate mounting are installed on the rear face of a holder.
You will find more information in Chapters "Holders (Page 213)" and "Mounting (Page 199)".
Typical diagram
Operating voltage
Color of the LED
Article number
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10221527)
24 V AC/DC Amber 3SU1401-1BB00-xAA0
Red
3SU1401-1BB20-xAA0
Yellow
3SU1401-1BB30-xAA0
Green
3SU1401-1BB40-xAA0
Blue
3SU1401-1BB50-xAA0
White
3SU1401-1BB60-xAA0
110 V AC
Amber
3SU1401-1BC00-xAA0
Red
3SU1401-1BC20-xAA0
Yellow
3SU1401-1BC30-xAA0
Green
3SU1401-1BC40-xAA0
Blue
3SU1401-1BC50-xAA0
White
3SU1401-1BC60-xAA0
230 V AC
Amber
3SU1401-1BF00-xAA0
Red
3SU1401-1BF20-xAA0
Yellow
3SU1401-1BF30-xAA0
Green
3SU1401-1BF40-xAA0
Blue
3SU1401-1BF50-xAA0
White
3SU1401-1BF60-xAA0
x: 1 = screw terminals
x: 3 = spring-loaded terminals