3SU10 pushbuttons and indicator lights
5.1 3SU10 devices for use on 3-slot holder
SIRIUS ACT 3SU1 pushbuttons and signaling devices
88 System Manual, 08/2018, A5E03457306020A/RS-AK/010
The ID key-operated switch is an electronic key-operated switch and has four switch
positions that are selected by keys with different codes. Using the four ID keys with different
codes, it is possible to select 1 to 4 positions. The ID keys are color-coded (yellow, blue, red,
green, white) so that they can be clearly differentiated at a glance. The ID key-operated
switch is intended primarily to replace the mechanical locks on different machines.
For the installation you must use the plastic holder (3SU1500-0AA10-0AA0).
You will find additional information in Chapters "Installation (Page 109)" and "Application
examples ID key-operated switches (Page 574)".
For the ID key-operated switches, two different versions of the electronic modules for ID key-
operated switches without / with IO-Link communications interface are available. You will find
information on the electronic modules in Chapters: 3SU14 contact modules and LED
modules "Electronic module for ID key-operated switches (Page 195)", "Technical data
(Page 439)".
You can find information on using the ID key-operated switch with IO-Link in Chapter
"IO-Link 3SU14 (Page 303)".
Collar / Front ring material
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/ww/Catalog/Products/10221495)
• Black
3SU1000-4WS10-0AA0
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/en/Catalog/Products/10226617)
• Black
3SU1030-4WS10-0AA0
You can find the appropriate ID keys in Chapter ID keys (Page 415).
To Next Page
Loading...
