Siemens SIRIUS ACT 3SU1 - Mounting; Installation Steps for Dust Cover

3SU19 accessories
13.3 Protection
SIRIUS ACT 3SU1 pushbuttons and signaling devices
410 System Manual, 08/2018, A5E03457306020A/RS-AK/010
13.3.10
Mounting
13.3.10.1
Installation steps for dust cover
Procedure
The example of a key-operated switch is used to show how to mount the dust cap. The dust
cap for ID key-operated switches is mounted in the same way.
Typical diagram
1.
Place the dust cap from the front onto the key-operated switch.
Typical diagram
2.
Fold the dust cap over.
3.
Push the dust cap onto the key-operated switch to protect the switch surface.
Typical diagram