Siemens SIRIUS ACT 3SU1 - Parameters - Data Set (Index) 131; A.1.1.13 Parameters - Data Set (Index) 131

Appendix
A.1 Process data and data sets
SIRIUS ACT 3SU1 pushbuttons and signaling devices
586 System Manual, 08/2018, A5E03457306020A/RS-AK/010
A.1.1.13 Parameters - Data set (index) 131
Data set (index) 131 (parameters)
Note
Bits that are not described in the tables below are reserved and should be ignored.
Table A- 13 Data set (index) 131 (parameters)
Byte.Bit Subindex Description
Operating system functions
0.0 ... 15.7 1 ... 3 Reserved
16.0 4 Switch in stages
Default: [0]
[0] disabled
[1] enabled
16.1 5 Switch position memory
Default: [0]
[0] disabled (key position = 0)
[1] enabled (last key position is retained)
16.2 6 Switch position retentive memory:
Default: [0]
[0] disabled
[1] enabled
16.3 7 Individually encodable ID keys only:
Default: [0]
[0] disabled
[1] enabled
17.0 ... 17.7 8 Switch position delay
Type: 8-bit unsigned (byte)
Resolution: 0.1 s = 1
Default: 20
Min: 1 or 0 (disabled)
Max: 100 * 0.1 s = 10 s
18.0 ... 18.7 9 Select memory range
Default [1]
Min: 1
Max: 5
19.0 ... 19.7 — Reserved