IO-Link 3SU14
12.3 Electronic modules for IO-Link
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
359
Mounting contact modules and IO-Link modules for base mounting
The electronic modules for IO-Link are mounted in the enclosure base like contact modules
or LED modules. To equip an enclosure with contact modules and an electronic module for
IO-Link, follow these steps:
1. Snap the contact module onto the slot in the enclosure marked "1", "2" or "3".
2. Insert the electronic module for IO-Link in an "intermediate slot, e.g. A / B or B / C.
To Next Page
Loading...
