Siemens SIRIUS ACT 3SU1 - Identification Data; A.1.1.3 Identification Data

Appendix
A.1 Process data and data sets
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
577
A.1.1.3
Identification data
Identification data
Identification data refers to data stored in a module that supports users in the following
areas:
● When checking the system configuration
● When locating modified system hardware
● When troubleshooting a system.
Modules can be uniquely identified using the identification data.
Table A- 3 Identification data of the electronic modules for ID key-operated switches for IO-Link
DPP
1)
Data set
Access
Parameter
Length
(bytes)
Default setting
Index (dec)
Index (dec)
0x07 (7) — r Vendor ID 2 0x00
0x08 (8)
—
r
0x2A
0x09 (9)
—
r
Device ID 3
0x0C
0x0A (10)
—
r
0x03
0x0B (11) — r FW 1.4.0 or FW 2.0.0 in compatibility mode:
0x01
FW 2.0.0: 0x02
—
0x10 (16)
r
Vendor Name
11
SIEMENS AG
— 0x11 (17) r Vendor Text 64
max.
Internet
(
http://support.automation.siemens.com/WW/v
iew/en/29801139/130000)
— 0x12 (18) r Product Name 64
max.
SIRIUS ACT electronic module for ID key-
operated switch
—
0x13 (19)
r
Product ID
18
3SU1400-1GD10-1AA0
—
0x17 (23)
r
Firmware Revision
7
Firmware version
— 0x18 (24) r / w Application Specific Name 32
max.
—
1)
Direct Parameter Page