3SU15 holders
9.2 Holders with modules
SIRIUS ACT 3SU1 pushbuttons and signaling devices
218 System Manual, 08/2018, A5E03457306020A/RS-AK/010
Overview of holders (plastic) with 1 contact and LED module
These variants are preassembled. You need only snap them onto the actuator, tighten the
fastening screws and connect the cables.
The LED module included in the scope of supply is a wide-voltage module with a voltage
range from 6 to 24 V AC/DC.
You can find information on the contact and LED modules used in Chapters "Contact
modules for front plate mounting (Page 171)" and "LED modules for front plate mounting
(Page 184)".
Siemens Industry Mall (http://mall.industry.siemens.com/mall/en/ww/Catalog/Products/10221517)
3SU1400-1AA10-1BA0 — 3SU1401-1BG00-1AA0 3SU1501-1AG00-1BA0
3SU1400-1AA10-1FA0 — — 3SU1500-1AA00-1FA0
3SU1400-1AA10-1BA0 — 3SU1401-1BG60-1AA0 3SU1501-1AG60-1BA0
3SU1400-1AA10-1BA0 3SU1400-1AA10-1BA0 3SU1401-1BG60-1AA0 3SU1501-1AG60-1NA0
-1AA10-1BA0: Contact module 1NO normally open contact
-1AA10-1CA0: Contact module 1NC normally closed contact
-1AA10-1FA0: Contact module 1NO1NC normally open contact / normally closed contact
3SU1401-1BG.0-1AA0: LED module
You can find further information on the holders in Chapter "Holders (Page 213)".
To Next Page
Loading...
