3SU18 enclosures
10.1 Enclosures for actuating and signaling elements
SIRIUS ACT 3SU1 pushbuttons and signaling devices
230 System Manual, 08/2018, A5E03457306020A/RS-AK/010
Dismantling front plate mounting on enclosures
1. Insert a screwdriver into the opening of the latches (broad snap hook) of the contact
modules or LED modules.
Press the screwdriver down to open the module latches.
2. Remove the modules.
3. Open the fixing screw on the holder.
4. Unlock the holder.
Move the holder backwards to detach it from the actuating or signaling element.
5. Remove the actuating or signaling element.
To Next Page
Loading...
