Siemens 7482255 Rev 01 Page 19 of 52
October 2002
Chapter 4 - Removing and Replacing Spare Parts
4. Loosen the two screws located at the bottom of the front cover, and pull out
the top edge of the cover as shown in Figure 4-16.
5. Unfasten three pairs of magic fasteners joining the front cover and the G50
or the G60 S (Figure 4-16).
Figure 4-16 Removing the Front Cover
Figure 4-17 Removing the Top Cover
SVO 9500
The screws designated as CK3x8 in Figure 4-13 are M3x8 binding head screws with exte
nal lock washers. The CK4x8 screws are M4x8 binding head screws with external lock
washers. The screws designated as S3x8 are M3x8 flat head screws. See "Fastener Refe
ence" (page H-1).
M4x10 screws
To Next Page
Loading...
