C4 User Manual
October 25, 2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 211
The following procedure describes how to set linked hall mask.
1. Navigate to MAIN MENU | SETUP | GROUP SETUP. See Figure 60.
2. From the GROUP SETUP menu, scroll and select Linked Hall Mask.
Figure 380: GROUP SETUP Menu – Linked Hall Mask
3. From the LINKED HALL MASK 1 menu, scroll and select the Hall boards within the group
that are linked.
Figure 381: LINKED HALL MASK 1 Menu
4. Scroll right and press Save.
18.9 Hall Medical Mask
The Hall Medical Mask configures hall boards for emergency medical service calls. These calls
put the nearest car on Emergency Medical Service mode of operation.
The following procedure describes how to set hall medical mask.
1. Navigate to MAIN MENU | SETUP | GROUP SETUP. See Figure 60.
2. From the GROUP SETUP menu, scroll and select Hall Medical Mask.
Figure 382: GROUP SETUP Menu – Hall Medical Mask
3. From the HALL MEDICAL MASK menu, scroll and select which cars are set for emergency
service calls.
Figure 383: HALL MEDICAL MASK Menu