C4 User Manual
Page 334 ©2021 Smartrise Engineering, Inc. All Rights Reserved October 25, 2021
2. From the GROUP SETUP menu, scroll and select XReg Cars.
Figure 675: GROUP SETUP Menu – XREG Cars
3. From the NUMBER OF XREG CARS menu, enter the number of cars from the legacy
system.
Figure 676: NUMBER OF XREG CARS Menu
4. Scroll right and press Save.
36.2 XReg Dest Timeout
If a car has been assigned a cross registration destination and does not answer within in a
period of time, the car is taken out of the group until the cross-registration timeout has
elapsed.
The following procedure describes the how to set the cross-registration timeout.
1. Navigate to MAIN MENU | SETUP | GROUP SETUP. See Figure 60.
2. From the GROUP SETUP menu, scroll and select XReg Destination Timeout.
Figure 677: GROUP SETUP Menu – XReg Destination Timeout
To Next Page
Loading...
Need help?
General
