C4 User Manual
Page 264 ©2021 Smartrise Engineering, Inc. All Rights Reserved October 25, 2021
31.3 Arrival Update Time
The arrival update time is the time set to update the lantern outputs prior to arriving at a floor.
The following procedure describes how to set the arrival update time.
1. Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 58.
2. From the MISCELLANEOUS menu, scroll and select Arrival Update Time.
Figure 492: MISCELLANEOUS Menu – Arrival Update Time
3. From the ARRIVAL UPDATE TIME menu, set the time to update lantern outputs.
Figure 493: ARRIVAL UPDATE TIME Menu
4. Scroll right and press Save.
To Next Page
Loading...
